Laser Technology TruPulse 360, Руководство пользователя

Страница: 25 / 58

LTI TruPulse

360

R User’s Manual Page 23
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
Tilt Sensor Calibration Routine
Figure #14 shows the steps required to complete the Calibration Routine. The instructions are on the
next page.
Figure #14


At each step, wait approximately 1 second before pressing the button. Then wait
another second before moving to the next position. It is important that the unit is held
steady when the
button is pressed.

The Tilt Calibration routine can be aborted at any time during the procedure with a
long press of
or . If the calibration is aborted, the unit restores the previous
stored calibration.