[1]
To achieve 1 ft (30 cm)
distance accuracy, hold down
until a decimal point
displays.
[2]
To shoot through
brush, use the filter mode,
foliage filter and a reflector.
[1]
Press until
( )
.
[2]
Aim at target where you have a clear line of sight
then press-and-hold
( )
.
[3]
Press to scroll through
(
)
.
Measure Distance:
In HD Mode, it will automatically measure SD, INC
and AZ* then calculate VD and HD. It outputs all the
values via serial and/or Bluetooth
®
(Models B & R only).
Measurements are from the center of laser to target.
Calibrate the Tilt Sensor
(Models 200/B)
:
Always perform on a flat, fairly level sur
face.
[1]
Press-and-hold
( )
, press until
( )
.
[2]
Press
( )
, press
( )
, press .
[3]
( )
, hold in position 1, press
( )
.
[4]
Rotate 180º to position 2, then press
( )
.
[5]
Press
( )
.
*For TruPulse 360/B/R models only
Helpful Tips:
[1]
[2]
