5
12
Warning, Class IIIa label for lasers
sold in the U.S. and Canada
LASER LIGHT
DO NOT STARE INTO BEAM
OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 3A LASER PRODUCT
Warning, Class IIIa labels for lasers
sold where IEC standards apply
Accessories
Laser
Light is emitted
from this aperture
AVOID EXPOSURE
Serial / CDRH / EC
compliance
Serial No.
Made in U.S.A. by: Laser Reference, Inc.
450 Salmar Ave.
•
Campbell, CA 95008
This product complies with FDA
standards 21 CFR subchapter J
X 0 0 0 0 0 0
Aperture
warning
Safety • L4 and L4+
Caution and certification label locations - L4+
Note: The L4+ transmitter is a class IIIa laser under the 1993 IEC 825-1
laser safety standard and revised edition of the European Norm EN60825.
The L4+ laser conforms to applicable EC directives regarding RFI and EMI.
The L4+ complies with FDA performance standards 21 CFR sub-chapter J.
A laser warning placard is included with lasers shipped to the U.S. and Canada.
It may be attached to the carrying case - with the case visible and placed near
where the laser is being used - for meeting job site posting requirements.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
CAUTION
LASER LIGHT
DO NOT STARE
INTO BEAM
CLASS II LASER PRODUCT
L4
L4+
W1 Wall and Vertical mount
The W1 is part of the basic package for the L4+
and is an available option for the L4 to allow
vertical setups for layout work or plumbing walls
or posts in a plane.
P1 Plumb Plate
The P1 allows quick and easy setups
for getting the L4+ over a point to transfer
points from floor to ceiling.
MT1 Magnetic Target
Two Mt1 targets are included in the basic
package for the L4+. MT1 targets are available
as replacements or to allow additional workers
to use the laser on larger jobs.
B40 Rechargeable Battery Kit
The B40 kit provides four industrial grade
Nickel-Cadmium batteries and a 110v
charger that plugs into the charging jack
at the rear of the laser.
!
Charge only
Ni-Cad batts.
