GyroView 3 Manual
Laseroptronix
Telephone office 0046-70 714 04 70
Enhagsslingan 23
187 40 Täby
Sweden
E-mail [email protected]
www.laseroptronix.se
Page 7
•Remove the batteries when storing the device for long period of time.
•Do not apply superfluous efforts at work with lens assembly, agile elements and thread
connections.
•The manufacturer can only make repair works.
•Due to considerable optical magnification of the optional night eyepiece some small structures
inside the tube coating in the form of dark and/ or white points may be seen in the field of view,
which does not affect the serviceability of the device.
7. TROUBLE SHOOTING
The stabilizing mode does not work. Check that the batteries are installed properly. Check
the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones.
The image does not appear in focus. Bring the inspected object to the center of the image.
Turning the eyepieces (8), adjust to achieve the clearest image on the screen. If the view still does
not seem in focus, clean the lenses. They could be foggy or dusty.
Image is ‘waving’ when stabilizing mode has been engaged. This is a typical ‘warming-
up’ effect that will last for no more than one minute after engaging the stabilizing mode.
Condensation accumulates on the parts In order to avoid misting of the eyepiece lens in cold
time use special protective covers.
Image has disappeared during nighttime observation (using optional
night eyepieces). When bright light gets into the objective lens of the night vision device it may
result in disappearing of the image as the automatic shut- off feature comes into action to protect
the device. Whenever this happens, turn the switch to the OFF position. In a minute or two the
device will be ready for further operation.
8. WARRANTY Gyro view binoculars.
Laseroptronix
warrants this product against defects in material and workmanship for one year from the
date of the original date of consumer's purchase, but no more than 12
months from the date of
manufacturing. Should your GW3 product prove defective during this period, please bring the
product securely packaged in its original container or an equivalent, along with proof of the date of
original purchase, toyour Dealer. They will repair (or at its option replace), the product or part
thereof, which, on inspection by
Laseroptronix, is found to be defective in materials or workmanship.
What This Warranty Does Not Cover:
Laseroptronix is not responsible for warranty service should the product fail to be properly
maintained or fail to function properly as a result of misuse, abuse, improper installation,
neglect, damage caused by disasters such as fire, flood, lightning, improper electrical current, or
service other than by an Authorized Service.
