Figure 30
Step 27. Locate the 1/8” bottom square hand rail and glue one
spindle center as seen in figure 30. Next glue 1/8” assembled
rail to the top stair landing newel post and add one newel post
to the outer end. Make sure the post are aligned with each
other. See figure 31.
Figure 31
Figure 32
Step 27. Locate the 1/8” top rounded rail and glue in between
post. Apply small amount of pressure to seat even to top of
post. If not even remove and trim spindle (very little) until
desired result is achieved. See figure 32.
