IIn
nsstta
alllla
attiio
on
n IIn
nssttrru
uccttiio
on
nss
G
Ge
en
n..IIII
FFO
OR
R B
BO
OLLT
T--O
ON
N O
OR
R R
RIIG
GIID
D S
ST
TU
UFFFFIIN
NG
G B
BO
OX
XE
ES
S::
If your stuffing box is a bolt-on or rigid type you will need to
reverse the plate and tube that are used to compress the
packing. Once reversed, the connection hose can be fitted
over the tube. When re-attaching your reversed plate and
tube, seal the two surfaces so that no water can leak
through. Products such as “Form-a-Gasket” or an automo-
tive type of gasket will work for this application. If your old
stuffing box was threaded on you will need to cover the
threads with a liquid gasket material like “Form-a-gasket” to
prevent the threads from cutting into the connection hose.
A
A
Transmission
Shaft
Bolt-on Stuffing box
A
A
B
B
C
C
B
B
C
C
Every engine, shaft, and motor mounts are different. Because
of this, every installation may be different. If you should expe-
rience any spray or “misting” during high speed operation
(after break-in period), add an additional 1/16” compressionto
the Clamp/Pressure assembly and repeat until the spray has
stopped at cruising RPM
The seal is created between the polished faces of the
Stainless steel and the carbon. If the seal leaks when the is
not turning, some foreign material such as grease or transmis-
sion fluid may be prohibiting the two faces from seating prop-
erly. To clean this foreign material from the two faces, insert a
clean cloth rag between carbon and stainless steel faces and
rotate it around the shaft vigorously. As you do this, water
will flush both faces of any impurities.
T
Trro
ou
ub
blle
essh
ho
oo
ottiin
ng
g
11
2
2
Spray or “mist” during operation.
Dripping while not operational.
Lasdrop 3-Year Limited Warranty
Nautical Specialties, Inc. hereinafter referred to as NSI,
warrants to the first retail purchase of thisproduct, or a
NSI product, properly incorporated in another venders
products that, for a period of three (3) years from the
date of original purchase, NSI products will be free from
defects in materials and workmanship. NSI makes no
warranty as to merchantability or to fitness of its
products for a particular purpose.
The above warranty does not apply to a product that has
not been installed or maintained in accordance with NSI
instructions, been subject to damage in an accident or
abused during operation, or repaired or modified by per-
sons other than NSI. This warranty is also void when NSI
products are installed at any location which is judged by
NSI to be an inappropriate application which is in NSI
judgement are compatible with the NSI product or
adversely affect its performance or durability.
If any NSI product is used commercially, for such pur-
poses as rental or other income-producing activities,
than this warranty is limited to one (1) year from the date
of original purchase.
NSI’s responsibility in respect to warranty claims is
limited solely to repair or replacement of product found
by NSI to be defective. NSI does not pay for labor
charges connected with removal of a product deemed to
be defective or with installation or replacement of
repaired product, or for any other incidental or
consequential damages resulting from product failure.
To make claim under this warranty, return the product
believed to be defective to Nautical Specialties, Inc.
14081 Timberview Shelby Twp. MI. 48315 along with
proof of purchase. If found to be defective, and if within
the warranty period, NSI will repair or replace the
and return it freight prepaid.
This warranty is and shall be in lieu of all other
warranties, whether expressed or implied by NSI, its
agents, employees, representatives or otherwise with
respect to any sale, service or other transaction on or
subsequent July 20, 1999.
Nautical Specialties Inc.
P.O. Box 223
New Baltimore, MI 48047
USA
toll free - 1 800 940 7325
direct - 586 725 2230
fax - 586 725 2250
