Issue 1
Page 2 of 24
EL-SMS-2G-TP / TP+ / PROBE-G USER MANUAL
Quick Start Guide
1.
Check that there is adequate mobile signal strength from the appropriate
provider at the location where you intend to use the unit.
2.
Download and install the “EasyLog SMS” App from Google Play store or
the App Store.
3.
Carefully remove the battery plate and fit your SIM card into the
microSIM holder.
4.
Insert 4 x AA alkaline batteries into the unit and replace the battery plate.
5.
Connect your probe in the external temperature probe port.
6.
Open the App on your smartphone or tablet and and add a new device.
Use the mobile number that was supplied with your SIM card.
7.
If using Android, select the device just added and press the “Setup” button.
8.
Configure the parameters to suit your intended application, then press
the “Start” button (Android) or “Send SMS Message” button (iOS) and
follow the onscreen instructions, which will prepare the unit to receive the
configuration SMS and send the message.
9.
Once the configuration has been completed, you will receive a
“Setup complete” message and the unit will begin monitoring.
@@@ [insert line diagram]
1
2
3
4
5
6
7
8
9
1
Status bu
�
on
2
Stop bu
�
on
3
Status LEDs
4
Netlight
5
External temperature probe port
6
Sounder
7
Ba
�
ery Bay
8
Reset switch
9
SIM card holder
