XLE-MD-DF-AD-LS-120V
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
OPERATION
1. Insert four (4) C Size batteries, or use an AC cord for power. If using an AC power cord, remove batteries from unit.
2. Fill soap tank with proper liquid according to the unit type. Do not overfill unit.
3. Slide the switch to the ON position to turn on the power.
a. Power switch is located behind the front cover under the soap tank.
4. Prime the dispenser by inducting several times to force out the air in the dispenser before first using.
5. Place hands underneath unit within the sensor area to activate the dispenser until the liquid comes out.
6. If using batteries, a low battery indicator will flash a Red LED light frequently when batteries need to be replaced.
MAINTENANCE
1. Unit is meant for indoor use only and to be placed in a cool environment. Avoid placing in direct sunlight or heat.
2. Use a dry towel to clean the outside of the unit.
3. This product is not waterproof. DO NOT install in high humidity locations.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
XLE-MD-DF-AD-LS-120V
is designed to provide years of reliable performance. Should the need for replacement
parts arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
