Front panel editor (FPE) / Auto Run icons
Mode icons
Light output icons
Alarm icons
To indicate the alarm that is currently active on the
controller, an icon is displayed in the Alarm Icon
section.
Navigation menu
To enter the navigation menu, press both the UP and
DOWN buttons simultaneously.
To navigate to the desired page, select the
corresponding icon by pressing the UP and DOWN
button and press the AUTO (Accept) button to enter.
If the AUTO button is not pressed, the display
automatically returns to the home page.
Display
Description
Appears when a remote start input
is active
Appears when a low battery run is
active
Appears when a scheduled run is
active
Display
Description
Appears when the engine is at rest
and the unit is in stop mode.
Appears when the engine is at rest
and the unit is in auto mode.
Appears when the engine is at rest
and the unit is waiting for a manual
start.
Appears when a timer is active, for
example cranking time, crank rest
etc.
Appears when the engine is
running, and all timers have
expired, either on or off load.
The animation speed is reduced
when running in idle mode.
Appears when the unit is in the
front panel editor.
Appears when a USB connection is
made to the controller.
Appears if either the configuration
file or engine file becomes
corrupted.
Display
Description
Appears when the corresponding
light output has been configured
and is not active.
Appears when the corresponding
light output has been configured
and is active.
Appears when a timer to delay the
light output activating or de-
activating is in progress
Display
Description
Display
Description
Home and generator voltage and
frequency instrumentation
Generator current and load
instrumentation
Engine instrumentation
Module information
Engine DTCs (Diagnostic Trouble
Codes) if active
i
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
29
of
33
