![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672079.webp)
79
Space Used Up:
No disk space.
Disk Offline:
A disk is not properly connected or is damaged.
Disk Abnormal:
A disk can be detected but cannot be
accessed.
Illegal Access:
A failed login attempt for a username that
does not exist or a password that is incorrect.
Network Disconnected:
Network connection is lost.
IP Conflict:
Devices on the network use the same IP address.
Recording/Snapshot Abnormal:
Storage resource cannot be
found, for example, when all hard disks are removed, or
when there is no disk in disk group 1 (see
more information).
Perform the following steps to configure an alert:
1.
Click
Alarm > Alert.
2.
Select an alert type, select the desired actions, and then
select the camera(s) for which you want to enable alarm
output.
3.
Click
Apply
to save the settings.
Buzzer
The buzzer can be triggered by alarms to alert the user. Follow the
steps to set how long the buzzer will buzz after it is triggered.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...