![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672077.webp)
77
3.
Click
right to
Trigger Actions
and set action(s) to trigger.
For more details, see
4.
(Optional) Click
right to
Arming Schedule
and then set
the time when actions will be triggered.
5.
(Optional) Click
Copy
to apply the same settings to other
cameras.
6.
Click
Apply
to save the settings.
Human Body Detection
Human body detection alarms occur when the presence of human
beings is detected in the specified area.
1.
Click
Alarm > Human Body Detection.
2.
Enable human body detection by selecting the check box
3.
Click
, and then draw detection area.
Note:
Only one detection area is allowed for each camera.
4.
Set detection sensitivity. The higher the sensitivity, the more
likely a human body will be detected.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...