![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672048.webp)
48
NOTE!
The duration ranges from 0 to 1800 seconds (default: 10). The
rotation speed ranges from 1 to 9 levels (default: 5).
Setting a Recorded Patrol
This function requires the camera's support. The drop-down list
and the buttons on the right are hidden if this function is not
supported by the camera. Currently only one recorded patrol
route is allowed.
Record a patrol, including the patrol route, the time that the
camera stays at a certain direction, rotation speed, zoom, focus
and focus.
1.
Click
to start recording. Steer the camera to the desired
directions, adjust the zoom, focus, iris as needed during the
process.
2.
Click
to stop recording. All the patrol actions have been
recorded.
3.
To start the recorded patrol, click
. Click
to stop.
Setting Auto Guard
The auto guard function instructs the PTZ camera to automatically
perform a pre-configured operation after some period of
inactivity.
This function is available in some cameras. The
Auto Guard
tab is
hidden if it is not supported.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...