![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672032.webp)
32
NOTE!
Contact the camera manufacturer for resource paths.
5.
Edit settings in the
Add/Modify
window as needed,
including the IP address, username and password, and then
click
Add
. Check status in the camera list.
Managing an IP Device
Manage IP devices under
Camera > Camera > Camera.
Click
to edit settings including the protocol, IP address,
port number, username and password. The
Camera IP
field
displays the IP address that the current channel links to, and
you may change the address so the channel links to another
device. The username and password must be consistent with
that of the IP camera.
Click to delete an IP device, or select multiple IP devices
and then click
Delete
. Channels corresponding to PoE ports
or switching ports cannot be deleted.
Click
to change the IP address of an IP camera and the
default gateway. A DVS' IP address cannot be editted from
the NVR. means this function is not available.
Sort Cameras
Sort cameras to display in the desired order.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...