![background image](http://html1.mh-extra.com/html/larson-electronics/nvr-ndaa-poe-4ch/nvr-ndaa-poe-4ch_instruction-manual_3722672028.webp)
28
4
Channel Configuration
Channel Management
This chapter describes how to add and manage IP devices in your
NVR. The IP devices mentioned in this manual mainly refer to IP
camera (or network camera); sometimes they can also be Digital
Video Server (DVS). Before you start, make sure the IP devices are
connected to your NVR via network.
CAUTION!
An IP device should be connected to one NVR only. An IP device
managed by multiple NVRs may cause unwanted issues.
Adding an IP Device
This section provides multiple options to add an IP device. Some
options are only applicable to certain NVR models. Choose one as
appropriate.
Option 1
1.
Click
Camera > Camera > Camera
. The system automatically
searches for IP devices and lists the discovered.
2.
(Optional) To search a specified network segment, click
Search Segment
and then set the address range.
3.
You may choose one of the following ways to add an IP
device:
Click
Add All
to add all the discovered IP devices allowed
(depending on channels supported by the NVR).
Click
Custom Add
. In the window displayed, enter the IP
address and complete other settings, and then click
Add
. You
may also click
Search Segment
and add discovered cameras
in the list.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...