Larson Electronics LLC
www.Magnalight.com
9419 E US HWY 75, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364 - E:
SAFETY AND USAGE INFORMATION
1.
Read these instructions completely before using the products and save them for future
reference.
2.
Do not use unit to recharge dry cell batteries
3.
Do not jump-start or attempt to recharge a frozen battery.
4.
Charge unit in a well-ventilated area.
5.
All batteries are affected by temperature changes, and the unit’s small, lightweight
battery is more sensitive to storage temperature than a standard automotive battery.
Temperatures above 68F degrees (20degrees C) decrease amperage output. The ideal
storage environment for emergency use is at room temperature.
BATTERY STATUS GAUGE
1.
Press the
RED
push button momentarily to turn the gauge on:
2.
The
GREEN
shaded indicator bar indicates the unit is capable of normal operation.
3.
The
YELLOW
shaded indicator bar indicates the unit needs to be recharged.
4.
The
RED
shaded indicator bar indicates the unit must be recharged before use.
RECHARGING
1.
Plug the unit into 115 VAC and note the lighted gauge indicator for battery status.
2.
The unit may be recharged by using an optional accessory power port cord with two
male ends.
3.
Plug one end into the unit’s 12V outlet and the other end into the vehicle’s 12V power
port socket. The vehicle must be running to charge with this method.
STORAGE
Unit may be stored virtually anywhere, and in any position.
BATTERY REPLACEMENT
This unit contains a sealed non-spill able lead acid battery. The battery must be recycled.
Contact Larson Electronics’ for replacing battery.
