![background image](http://html1.mh-extra.com/html/larson-electronics/led10w-1x4lt/led10w-1x4lt_quick-start-manual_3865559002.webp)
Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
BATTERY STATUS GAUGE
Press the red push button momentarily to turn the gauge on:
The
GREEN
shaded indicator bar indicates the unit is capable of normal operation.
The
YELLOW
shaded indicator bar indicates the unit needs to be recharged.
The
RED
shaded indicator bar indicates the unit must be recharged before use.
Plug the unit into 115 VAC and note the lighted gauge indicator for battery status.
RECHARGING USING 12-VOLT POWER (requires cord)
The unit may be recharged by using an optional accessory power port cord with two male ends.
Plug one end into the unit’s 12V outlet and the other end into the vehicle’s 12V power port
socket. The vehicle must be running to charge with this method.
STORING
Unit may be stored virtually anywhere, and in any position.
BATTERY REPLACEMENT
This unit contains a sealed non-spillable lead acid battery. The battery must be recycled.
Contact Larson Electronics for replacing battery.