IND-MD-TM-CS-TH-KT
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
20 of 21
1. Infrared image setting
➢
Flip Switch: Manually adjust the infrared image flip.
2. Visible image Settings
➢
Visible light far (near) focus: adjust the focal length to obtain a clear image
。
➢
Visible light zoom + (-): increase (decrease) multiples to enlarge (reduce) the
image.
4.2.4 Other settings
Click the "setting" button in the main interface -- > "alarm setting" -- > "other" to enter the setting interface, as shown in
figure 4-12.
Figure 4-12 Other parameter setting interface
1. Save path of alarm information: set the save path of alarm picture file in hard disk.
2. Automatic deletion of alarm pictures: set the time for the pictures recording alarm events to be kept on the hard
disk, such as the set 62 days, and the software will automatically clean the alarm directory 62 days before
each startup.
3. Streaming service: this service can be used for network hard disk video recorder (NVR) to obtain video
stream from the system, so as to record the storage.
4. Backup configuration files and restore configuration files are used to backup and restore all system Settings, and
restore factory Settings are used to restore to the configuration state when the supplier shipped.
5. Alarm push service: customers who are not connected to the third-party software platform or the cloud service
platform should ignore this function. The service is to push the alarm pictures and temperature measurement data to
the third-party software platform or cloud service, and set the content including IP address, port and alarm push
service switch, and push it regularly. he system language is used for customers to choose to switch familiar
languages, so as to operate the equipment better.
