Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
4
IND-AHF-BX-UVC-R2-120V-15C
Attach supply line wires to the appropriate light fixture wires as shown
in the diagram
Secure each pair of wires according to the diagram. Utilize a junction box or
similar device and take precautionary steps for weatherproofing all
connections if installed in a location where water may come in contact with the
unit. Ensure the unit is properly grounded and that wiring is done according to
all local and national electrical/building codes.
Standard Cord Cap
This unit comes pre-wired from factory with the selected cord cap. Take
precautionary steps for weatherproofing all connections if installed in a
location where water may come in contact with the unit. All outdoor
installations and indoor installations near a wet location require the use of a
GFCI device for safety, according to the National Electrical Code® (NEC).
Ensure the unit is properly grounded.
WIRING
/PLUG
This unit is equipped with 15 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade
cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for
110V wall outlets with ground or NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets. Alternatively, we can
provide flying leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps.
Please choose pigtail option below for flying leads with no plug.
Standard pigtail(flying leads) wiring
We strongly encourage a licensed electrician install this product
, in all locations especially in outdoor areas
where weatherproofing may be required. Universal voltage driver permits operation at
120V AC.
Warning:
Check product label for correct input voltage!
MOUNTING
The IND-AHF-BX-UVC-R2-120V-15C can be deployed as a free-standing unit in occupied areas. This unit is also compatible
with permanent installations on walls, surfaces or ceilings. We offer models with 2x2 and 2x4 troffer mount features for
installations on ceilings with tiles or grids.
OPERATION
This unit is equipped with 15 feet of 16/3 chemical and abrasion resistant SOOW cord that is fitted with an industrial grade
cord cap for easy connection to common wall outlets. Plug options include standard 5-15 15 amp straight blade plug for 110V
wall outlets with ground or NEMA L5-15 15 amp twist lock plug for 125V twist lock outlets. Alternatively, we can provide flying
leads with no plug for hard wire applications or for operators who prefer to wire in user provided cord caps. Please choose
pigtail option below for flying leads with no plug.
