Network (RJ-45)
(LAN, LAN w/PoE)
cable
Drop cable bundle
Alarm In/Out cables
CVBS (BNC)
video cable
Audio In/Out cables
RS-485 cable
Power cable (24 Vac)
Connect the camera to other devices as needed in the order shown below.
Alarm Input/Output cables
The alarm input/output drop cable bundle provides five wires, ALARM_IN1, ALARM_IN2, ALARM_OUT1, ALARM_COM1 and
ALARM_GND. These wires are color coded and labeled.
These connection use the ALARM_IN1 and ALARM_GND wires for alarm input 1, and ALARM_IN2 and ALARM_GND wires for
alarm input 2. Alarm inputs normally connect normally open (NO) or normally closed (NC) sensor contacts. The normal contact
state is configurable in the camera setup menus.
Connect the camera alarm output drop cables to an alarm reporting device. See the Specifications section for interface requirements
and the diagram below. These connection use the ALARM_OUT1 and ALARM_COM1 wires.
Camera
Relay output
OUT1
OUT1
COM1
COM1
DC Load
GND OUT
12 Vdc
30 mA
JQ0-3FG
Relay
(10 A 250 Vac)
L
N
~ 220 Vac
Camera
Relay output
Larson Electronics, LLC
Phone: (877) 348-9680
Fax: (903) 498-3364
www.larsonelectronics.com
1
5
of 30
IP
PTZ
Network
Camera
Setup Guide