0
HUL-P10WR-DM-ILS-1227
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
3
of
3
The light head is mounted to the handle with an adjustable hinge that allows the head to be adjusted vertically. The
five inch tall handle is ergonomically designed to fit the contours of your hand for a comfortable grip.
OPERATION
The LED light is designed to work on either 12 or 24 volts DC depending on the
option selected. Check product nameplate for the correct voltage of your unit.
Use the
polycarbonate Handle
on base of light for
hand-held
movement.
Adjust tightness of tilt movement using the tightening bolts on sides of base
hinge.
POWER
1.
Connect deutsch connector/cord to light.
2.
Run cord and plug into compatible receptacle outputting voltage listed on
product.
3.
This light is
“instant-on” and will illuminate once plugged in.
4.
Attach magnetic base to ferrous metal surface. Clean off magnet prior to applying to painted surfaces.
If spotlight gets loose, tighten adjustment screws on trunnion mount.
If spotlight does not illuminate, check deutsch connector and/or power source.
DETACHABLE CORDS
Cord is attached via a weatherproof 2-pin Deutsch connector.
The cord is detachable by depressing the tab on the top of the connectors. This
enables the operator to leave the cord connected to the power source and
remove to store the light.
Additional or replacement cords can be ordered from our website. Contact us
for more information.
Power transformers (DCP-xx-DP series) can be purchased through our website
to run this spotlight from household wall outlets.
Tightening Bolt
QUICK DISCONNECT
DEUTSCH CONNECTOR
MAINTENANCE
There are no serviceable parts inside the fixture. However, it is good practice to routinely clean and check the
fixture for proper function.
•
Disconnect power running to the lamp and be sure the fixture is cool to the touch.
•
Use a non-abrasive glass cleaning solution to clean the lens.
Note: It is not necessary to open the fixture and clean or touch the LED’s.
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
HUL-P10WR-DM-ILS-1227
is designed to provide years of reliable performance. Should the need for replacement
parts arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.