HUL-LED25WRE-12.3-50GCR-24I
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
DETACHABLE CORDS
USE AND CARE
Unauthorized modification may impair the function and/or safety of the work
light and could affect the life of the equipment. Always check damaged or
worn out parts before using the work light. When work light is not in use,
store it in a secure place out of the reach of children. Inspect for good
working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
HL-85-LEDWRE-45W-CPR-12.3-50GCR
is designed to provide
years of reliable lighting performance. Should the need for replacement
parts arise, please contact Larson Electronics at the contact information
below.
Should further information not covered by these instructions be required,
please contact Larson Electronics at 1-800-369-6671 or
for further assistance.
Please visit LarsonElectronics.com for
Warranty
and
Return
information.
•
Each cord is attached via a weatherproof 2-pin Deutsch connector.
•
The cords are detachable by depressing the tab on the top of the connectors.
This enables the operator to leave the cord connected to the power source and
remove to store the light.
•
Additional or replacement cords can be ordered from our website.
MOUNTING
1.
These units are handheld via the pistol grip handle, but can be mounted via the 3/8-16" brass nut fastener embedded
into the base of the handle.
2.
We offer a 100LB magnetic base (MM-2) for magnetic mounting, and a permanent mounting plate with swiveling and
tilting bracket (PMB-4X4) for permanent mounting.
