![background image](http://html1.mh-extra.com/html/larson-electronics/hal-16bs-1x185led-cpr-100/hal-16bs-1x185led-cpr-100_instruction-manual_4574911002.webp)
HAL-16BS-1X185LED-CPR-100
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
Maintenance includes a careful examination to ensure at least:
A.
The Light Body is not cracked, broken or breeched.
B.
The Lens is not cracked or chipped.
C.
The Cable is not frayed and is gripping tightly in all points of cable contact.
D.
The Cable Jacket is completely intact and that no internal conductors or conductor insulation is
exposed.
E.
The Connection Box is not cracked, broken or breeched.
F.
The Cord Plug is not cracked or damaged and the Ground Post is intact.
For your safety and to maximize the life of the light, avoid rough usage such as:
A.
Pulling the Light by the Cable, which could weaken or damage the cable.
B.
Impacting the lens with hard, sharp or heavy objects, which could cause the lens to
scratch, chip, crack, or shatter.
C.
Disconnecting the Cord Plug from the receptacle by pulling on the Cable.
Keeping the light clean and free of material splatter, overspray, and debris during usage will ensure
the maximum life and luminosity of the light.
TROUBLESHOOTING
Refer to the guide below or contact the manufacturer if the fixture does not function properly.
Is the correct line voltage being supplied to the fixture?
Is the fixture properly grounded?
Make sure installed power switch is functioning properly (if applicable).
These instructions may not cover all details or variations of this product for your equipment or installation
requirements. Should further information not covered by these instructions be required, please contact
Larson Electronics at
1-800-369-6671 for further assistance.
Please visit LarsonElectronics.com for
Warranty
and
Return
information.