![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3745446162.webp)
User Manual of Network Camera
158
Figure 12-16 RS-232 Settings
Note:
If you want to connect the camera by the RS-232 port, the parameters of the
RS-232 should be exactly the same with the parameters you configured here.
2.
Click
Save
to save the settings.
12.9
RS-485 Settings
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of
the PTZ parameters should be done before you control the PTZ unit.
Steps:
1.
Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS485
Figure 12-17 RS-485 Settings
2.
Set the RS-485 parameters and click
Save
to save the settings.
By default, the Baud Rate is set as 9600 bps, the Data Bit is 8, the stop bit is 1 and
the Parity and Flow Control is None.
Note:
The Baud Rate, PTZ Protocol and PTZ Address parameters should be
exactly the same as the PTZ camera parameters.
Содержание EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
