Главная
/
Larson Electronics
/
EPS-PB10-MS-AT-V4
/
Руководство пользователя

Larson Electronics EPS-PB10-MS-AT-V4, Руководство пользователя, Страница: 2 / 2

Поделиться

1
2

Страница: 2 / 2

Larson Electronics EPS-PB10-MS-AT-V4 Скачать руководство пользователя страница 2

Align the holes of the strap with the holes of the cover.

Use two screws to mount the switch onto the cover.

CAUTION:

Use 12 AWG copper conductors only. Insert the bare wire conductor(s) under terminal

clamp and securely tighten the screw(s). Note: Do not exceed 35 in-lbs. of torque.

«
1
2

Содержание EPS-PB10-MS-AT-V4

Страница 1: ...e devices Only gaskets designed for and permanently installed in these devices may be used 6 In accordance with the hazardous location information specifying Class and Group listing marked on the device sealing fittings must be added that will comply with requirements in the latest issue of the Canadian Electrical Code or National Electrical Code and any special requirements that are stated in the...

Страница 2: ...e holes of the cover Use two screws to mount the switch onto the cover CAUTION Use 12 AWG copper conductors only Insert the bare wire conductor s under terminal clamp and securely tighten the screw s Note Do not exceed 35 in lbs of torque ...

Отзывы:

Нет отзывов