![background image](http://html1.mh-extra.com/html/larson-electronics/btt-lon-207wh-smbus/btt-lon-207wh-smbus_instruction-manual_3698080004.webp)
Most batteries will tolerate 3.3V to 5V pull-up communication levels. A specific design may require this voltage to vary, especially if
mixing I2C and SMBus on a single communication bus. This scenario may require a voltage-level translator in the design if operating
on a lower voltage bus (i.e., 1.8V).
ADDITIONAL INFORMATION
Helpful links for further SMBus and related information are listed below:
www.smartbattery.org/ sbs-
forum.org/
www.analogdevices.com
www.linear.com
www.nxp.com
www.ti.com
For additional information on Larson Electronics products and services, please visit:
www.
larsonelectronics.com
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
4
of
4
BTT-LON-207WH-SMBUS
USE AND CARE
Unauthorized modification may impair the function and/or safety of this device and could affect the life of the equipment.
Always check for damaged or worn out parts before using the device. Store it in a secure place out of the reach of
children when not in use. Inspect for good working condition prior to storage and before re-use.
REPLACEMENT PARTS
The
BTT-LON-207WH-SMBUS
is designed to provide years of reliable performance. Should the need for replacement
parts arise, please contact Larson Electronics.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.
SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.