APM-GL20004
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
2
of
2
b.
While holding the on/off button down, reinstall the power (replace fuse or connect vehicle battery).
c.
Keep on/off button depressed for 5-6 seconds, and then release. The light should now be programmed.
OPERATION OF SPOTLIGHT
1.
Using the remote control, turn on the light by depressing the on/ off button.
2.
With the joystick on the dash control, rotate your light to the desired location.
3.
The speed of the light rotation can be controlled by depressing the fast/slow button one time and by depressing
it again to restore the original speed.
4.
The hard wired dash control will be backlit when the bulb is illuminated.
USAGE:
This light is intended for off-road and utility use only
This light is intended to be mounted outside the vehicle while in use
This light may only be disassembled and repaired by an authorized representative
MISUSE:
This light is not approved for road or highway use
This light is not approved for underwater use
This light is not approved for inverted mounting
This light is not approved for use inside a vehicle or enclosure and power should be disconnected prior to
placing the light in such circumstance
This light may be damaged if operated in icing conditions
This light may only be dismantled by an authorized representative
Any violation of the above referenced misuses will be considered grounds for warranty refusal
USE AND CARE
Always check damaged or worn out parts before using the work light. Broken parts will affect operation. When not in use,
store work light in a secure place out of the reach of children. Inspect it for good working condition prior to storage and
before re-use.
MAINTENANCE
Maintain your work light. It is recommended that the general condition of any work light be examined before it is used.
Keep your work light in good repair by adopting a program of conscientious repair and maintenance. Have necessary
repairs made by qualified service personnel.
IMPORTANT SAFETY INFORMATION
This symbol is to alert you to important operating or servicing instructions that appear in your instructions. Always follow
basic safety precautions when using this product to reduce the risk of injury, fire or electric shock.
This light is for off road and utility use only. It is not designed for road use as a driving light.
The GL-30204 complies with Part. 15.105 of the FCC Rules. This equipment has been tested and found to comply with the limits for
a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
FCC RULE Part. 15.21 - Changes or modifications made by the user not expressly approved by Larson Electronics, LLC for
compliance could void the user’s authority to operate the equipment.
THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR
INSTALLATION REQUIREMENTS. SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE
REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT
OR BY PHONE AT 1-800-
369-6671 FOR FURTHER ASSISTANCE.
PLEASE VISIT LARSONELECTRONICS.COM FOR
WARRANTY
AND
RETURN
INFORMATION.
