Larson Davis 2221 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 35

Larson Davis 2221 Скачать руководство пользователя страница 11

Unpacking and Inspection:

1-3

Unpacking and Inspection

Your Model 2221 has been shipped in protective packaging.
Please verify the package contains the items listed below
and retain the shipping container for safe shipment at a
future date. Report any damage or shortage immediately to
Larson Davis, Inc. at 801 375-0177.

If you have not already done so, please record your
instrument’s serial number (located on the bottom of the
instrument) and the purchase date. You may be asked to give
this information in future communications with Larson
Davis.

Accessories and Optional Equipment

The Model 2221 delivered with the following

standard

accessories:

•

Six 1.5V AA Alkaline cells

• PSA017 115 Vac to 9Vdc 500 mA Power Adaptor

• Adjustment tool for use with vernier gain control

• User Manual (Larson Davis part number I2221.01)

• Calibration Certificate

The following

optional

equipment is also available:

• PRM902 and PRM903 1/2” Microphone Preamplifiers

• ADP008 1” microphone to 1/2” microphone preamplifier

adaptor

• ADP043 1/4” microphone to 1/2” microphone

preamplifier adaptor

«
...
9
10
11
12
13
...
»

Содержание 2221




































Отзывы:

Нет отзывов