LARS LAJ TRESS MODERN NATURE, Руководство пользователя

Страница: 3 / 18

3
30200
Before installation :
INSTALLATION
1.
2. Once you have assembled the product plate (final step of the assembly instruction on page ‘Installation manual’
of the logbook) the installation is finished. You can begin to clean up the building site.
Prepare and fence area for installation.
INSTALLATION - DRILLING
1. Larch wood is a hard wood and that means that you need to drill screws slower than for example in pine wood.
2. The screws don´t hold for the fastest speed on drilling machine.
INSTALLATION - FOUNDATIONS
1. Later in installation manual we are showing how the product could be installed in ground. If no concrete is
needed you need to pack the material in the hole so it´s packed in a good way around the foundation.
2. It´s always the installers responsibility that the product is totally solid in ground.
3. If the material in the ground is unstable, concrete may be needed sometimes.
ENTRAPMENTS
1. When the device is installed, check the all dimensions match and check that you have avoided dimensions that
are dangerous for the child:
Dimensions dangerous for the Entrapment
Small finger and large finger
45 mm Neck
Torso, small head, large head
CHECKS
1. After installation on the device, daily or weekly functional checks should take place depending in the intensity
of use - by a trained employee and functional quarterly and international controls - by playground inspector.
QUESTIONS
1. If this is your first time to install a unit from us you should read installation manual very carefully.
2. If you have any doubts, please call us so we can guide you before trying to much.