Larry vs Harry Twin Seat, Инструкция по сборке

Страница: 5 / 9

Step 2
Attaching the Base + 5-point Harnesses
Align bolts with holes in the
back (1) and in the center (2) of
the Honeycomb Board.
Place Base (3) in the bottom, inside the Canopy
Point backward towards the back of the Canopy
Point forward towards the headtube of the Bullitt
Note! Make sure the seat belt
buckles point inwards (under-
neath the foamy part) before
attaching the bolts.
1 1
2
Attach the 5-point Harnesses
to the buckles in the bottom.
Fold them forward/up, so you can
see what you are doing next.
Grease your center bolt and
mount it in the bottom center
loosely so you can align the rest.
Mount the 2 bolts (from the back
/outside of the Canopy) to the
tubes (1). Add washers to the 2 bolts.
Grease bolts.
Tighten the nuts, so the Twin Seat
tubes sits closely to the frame.
Tighten the center bolt too.
Click
!
Click!
x2
1 2
3
5 6
4
A B
5-6 Nm
5