F14
F15
F12
F13
F13
F16
OPEN
ON
WASHING OF THE NEW EQUIPMENT
• The equipment has already been adjusted at our factory
with light mineral oil left inside the pumping group as
protection. Therefore, wash with diluent before sucking
the product.
• Lift the suction pipe and dip it into the solvent tank.
• Clean the inside of the tank with a brush.
• Open the product output tap (
F15
).
• Pull the lever (
F12
) for the first cold start up (in position
CHOKE/CLOSE).
• Ensure the gun (
F14
) is without nozzle.
• Pull the start up cord (
F13
).
• Start the motor following the indications provided in the
chapter “
STARTING THE MOTOR
”.
• Press the switch (
F16
) of the equipment
“ON”
(I)
.
Ed. 001 - 12/2015
www.larius.eu
ZEUS LINER
12
