![Larius New Excalibur Скачать руководство пользователя страница 33](http://html1.mh-extra.com/html/larius/new-excalibur/new-excalibur_operating-and-maintenance-instruction-manual_676418033.webp)
Ed. 015 - 02/2019
www.larius.eu
NEW EXCALIBUR
29
•
Put liquid PTFE on the first two turns(
p31
) and (
p32
) to avoid
the two components coupled as shown from unscrewing.
•
Use a 36 mm spanner to screw on the pump unit (
p10
).
•
Make the piston stem (
p19
) fitted previously complete a
full stroke as shown.
•
Use the pin (
p12
) supplied to tighten the gasket compression
ring nut (
p11
).
Close this until it is fully touching, without forcing.
COrreCT pOsITIONING OF THe pUMp UNIT
Once the unit has been refitted, proceed as follows:
•
Check the position of the con rod, which should be posi-
tioned at its lower stopping point.
•
Put the entire pump unit (
p10
) inside the reduction cover
(
p33
) as shown.
P32
P31
P10
P19
P11
P12
Содержание New Excalibur
Страница 13: ...Ed 015 02 2019 www larius eu NEW EXCALIBUR 9 ...
Страница 59: ...PAINT SPRAYING EQUIPMENT L innovazione Quella vera ...