PARTS LIST & DIAGRAM
Part #
Description
1
Base
2
Handle
3
Jaws
4
Mounting Spots
OPERATING INSTRUCTIONS
WARNING!
These are basic instructions. Operator should use common sense
when using this vise.
1.
Make sure work area is clean, clutter-free and well lit.
2.
Place item you want to secure between the jaws.
3.
Turn the handle clockwise until the jaws are firmly holding the item.
MAINTENANCE
1. Use the drill press vise for your application. The correct drill press vise will do
the job better and safer for the application which it was designed.
2.
Check for misalignment, breakage of parts and any other condition that
may affect the drill press vise’s use.
3.
Make sure the drill press vise, jaws and lead screw are clean and free of dirt,
oil, grease and any other debris.
4.
Check all clamping or mounting bolts to insure they have not become
loose.
5.
Use this drill press vise in accordance with these instructions and in the
manner intended for this particular type of product, taking into account the
area, conditions and task to be performed. Use of the drill press vise for
applications different from those intended could result in a hazardous
situation.
NOTE:
Do not over-tighten the handle. Over-tightening could
cause damage to vise or item placed in vise
.
4
Page 3 of 4
NOTE:
Parts are listed for
illustration purposes only
and are not necessarily
available individually as
replacement parts.
2
3
1
WARNING:
Never use a cheater pipe to increase leverage.