LARDIS LARDIS:ONE LAR-1192, Руководство по установке, Страница: 14 / 22

LARDIS LAR-1192 Page 14 of 22 RTM:IT 2022-11-30
8 Rear View Camera Connection
The video signal of the rear-view camera is connected to the cable set of the cradle [B] using
the included RCA adapter cable. The video input supports FBAS PAL.
The parallel hollow connector is originally intended to supply the rear-view camera. The
operating voltage present there is provided via the control panel. We recommend that you
do not use this connector to supply the camera, but to fuse and supply it separately.
The yellow stranded wire, which is led out of the wiring set of the cradle, is used to switch
between the navigation/radio view and the rear-view camera. When a positive switching
voltage is applied, the display toggles to the rear-view camera. When the switching voltage is
turned off, the display returns to the navigation view or the radio control view.
The parallel black stranded wire is an additional ground reference point to the trigger line,
which does not necessarily have to be connected, since this is potential-equal with the
terminal 31 supply connection in the line set.
Feh
ler!
Ver
wei
squ
elle
kon
nte
nic
ht
gef
un
den
we
rde
n.
[B]
[D]
[G]
FBAS
input
(RCA)
Trigger
input