10/10
LARA Intercom
5276, 5277, 5278, 5279, 5280, 5281 02-59/2016 rev.:4
ELKO EP, s.r.o. | Palackého 493 | 769 01 Holešov - Všetuly | Czech Republic | e-mail: [email protected] | Support: +420 778 427 366
www.elkoep.com
•
The product is not communicating, the display is not illuminated
Solution: Check the power supply. Check to see if the product is connected to the power supply and if the RJ45 connector is connected to the product. Check if the power source PoE
is connected to the network.
•
The product is illuminated but the radio does not play.
Solution: Check the IP address of the radio server, or its new settings.
Check the Ethernet network connection. Disconnect and reconnect the RJ45 Ethernet connector. After repeated connection, the product displays system information; if
within fi ve seconds the player display does not appear,there must be some network connection issues, check the network settings.
•
Interrupted playing, frequent reading of the radio.
Probably insuffi
cient Internet connection speed.
•
Restart the product.
Device restart is used to restart without deleting the set data. Do this by a short press (+/- 1 sec) of the RESET button located on the device cover in the state where the product is
connected to the power supply, or by disconnecting and reconnecting the LAN cable or PoE adapter.
Troubleshooting
Maintaining the device
The device front panel and frame can be cleaned using a dry or slightly moistened rag. Avoid use of other cleaning agents.
The company ELKO EP, as the manufacturer, is entitled to make technical modifi cations to the product, in the technical specifi cation and product manual, without prior notifi cation. ELKO EP bears no liability for possible incompleteness and mistakes in this document.
IP Intercoms
Card reader
3-buttons
module
Dialpad
Video
door-phone
Producer:
2N
Type:
Verso
Producer:
DAHUA
Type:
VTO2000a
Producer:
Alphatech
Type:
IP-Bold