LapSafe ClassBuddy Locker 32, Руководство пользователя

Страница: 5 / 11

8 9
Front Door Operation
Once the door lock is released the hinge allows the locker door to swing
through approximately 150 degrees until it meets the side of the locker.
Do not
let go of the door while it is moving.
Do not
force the door in either direction.
Both of these actions could damage the door or the locker carcase.
Power Management Cassette
The power management cassette in the top of your ClassBuddy™ Locker
32 may get warm when it is handling a significant electrical load for a
period of time and this, in turn, may make the top of the locker feel warm
to the touch.
This is completely normal and will cool down when the power demand
reduces.
Thermal Trip
In the United Kingdom the detachable mains lead carries a fuse for the
protection of users.
In the event that your ClassBuddy™ Locker 32 has been installed with no
wall plug the power management cassette also has a resettable thermal
trip. This trip acts in much the same way as a fuse to protect users and it
can be re-set. The thermal trip is mounted on the back edge of the power
management cassette in the top of the side compartment.
When the trip has operated there will be no power to the sockets and the
centre button of the trip will be extend by approximately 12mm.
Power Sockets
The locker power sockets are housed in the side compartment and they
are designed to provide power for small loads up to a maximum of 90
watts per socket (nominal rating of the AC adapter).
UNDER NO CIRCUMSTANCES SHOULD A HEAVY LOAD
BE PLUGGED INTO A SOCKET.