Quick Start Guide PROFINET switch 4/8/16 port
17
16. Resetting to factory settings
In order to reset the PROFINET switch to the delivery status, the function “Factory Reset” can be used in the web interface under “System”
g
“Restart”.
Alternatively, the PROFINET switch can be reset by pressing and holding the “FCN” button while the device restarts. A restart can be carried out by switching the power supply off and on or by
activating the RST button.
The successful resetting of the parameters and settings is acknowledged during the boot process by the SF LED lighting up together with the PWR LED.
17. Firmware update
A firmware update can be carried out via the web interface.
The firmware update file can be selected in the menu “System
g
Firmware”.
The file has the ending “HUF”.
The firmware is transferred to the PROFINET switch and burned with the
“Send” button.
The new firmware is active following a restart of the PROFINET switch.
Important:
Switching off the power supply during the update process can make
the device unusable.
SCAN
QR CODE
TO GET
FIRMWARE
Please download the firmware update file under www.lappkabel.com/activenetworkcomponents
or scan the QR code.
