44428235
ASSEMBLY INSTRUCTION
Valid from:
17.07.2019
EPIC
®
SOLAR 4 PLUS
Document: L44428235EN
Version: 02
Page 8 of 9
We reserve all rights according to DIN ISO 16016.
Mounting
Insert the crimped contact into the opened cable gland until the contact clicks into place.
Lightly pull the cable to make sure that the contact is properly engaged.
Turn cap nut “hand-tight” (4,5 Nm) – finished. Spanner size 19.
(EPIC
®
SOLAR 4PLUS F)
Connecting and Disconnecting
Before plugging in, check the plug-in area for any dirt and, if necessary, clean it. Especially the
O-ring on the female connector must be absolutely clean. Remove moisture. Connect EPIC
®
SOLAR 4 PLUS, male and female until the snap-in hooks are completely engaged on both sides.
To disconnect, press the latching hooks on both sides with the standard pliers (article
3115160) and pull them apart carefully but firmly.
