LAPLACE INSTRUMENTS RF6000, Руководство пользователя

Страница: 21 / 36

Laplace Instruments Ltd Synthesiser Manual
Page 21
5.2 Overview
The screen layout
The screen is divided into 7 main areas:
1
2
3
4
5 6 7
1. The Main Menu bar across the top (File, Display, Configure, Help) in a conventional
Windows application style.
A full description of each menu item is given later.
2. The status indicator areas running down the left hand side.
i) Synthesiser operating mode
ii) EUT status
iii) System fault indicators.
3. The Monitor area.
Displays current test parameters, continuously updated as a test proceeds.
4. The Main operating control buttons
Controls Pre-Scan, Test, Dwell (Pause), and STOP.
5.
The Main Test mode selection.
These control the mode of operation AND the content of area 6 (see below).
The three test modes are:
i) Standard Scan - For conventional frequency scan of signal at fixed level (V/m).
ii) Single Point (frequency) - Manual or semi-automatic control of frequency and level.
iii)
Custom Scan - Enables programming of complex scan profiles as required, for example, by
products which are sensitive to certain frequencies (eg radio receivers).
iv) Report Results - Displays a screen on which the results of a test are plotted graphically for ease of
viewing and interpretation.
6. The main setup and results display area.
This area shows one of 4 different screens, one for each of three operating modes plus a
reporting page, selected by the Test Mode Select buttons in area 5.