LT250
WIRELESS INTERCOM BASIC SYSTEM QUICK REFERENCE
1 MAY 2016 Rev. 2.5
<MONITOR Menu>
15
<NORMAL Menu>
<BS Menu>
1.
Headset TALK button with indicator light
2.
Headset communication group button
3.
AUX IN, AUX IN/OUT button with indicator light
4.
AUX IN, AUX IN/OUT communication group button
5.
RF ALERT indicator light
6.
Remote Base Station LINK Indicator light
7.
Remote Base Station ACTIVE indicator light
8.
Headset speaker volume control (UP) / Menu selection button
9.
Headset speaker volume control (DOWN) / Menu Selection button
10.
Menu selection button (LEFT)
11.
Menu selection button (RIGHT)
12.
Menu SET button
13.
Headset cable connector (Receptacle)
14.
Hands Free/PTT mode selection button
15.
OLED Display
1.
Antenna connector
2.
AUX IN connector
3.
AUX OUT connector
4.
Power switch
5.
Antenna connector
6.
8-OHM speaker 2-pin spring clamp connector
7.
USB connector
8.
LAN RJ-45 connector
9.
POWER connector
10.
Wall-mount bracket holder (bottom)
LTWI-BS250 BASE STATION CONTROLS AND CONNECTIONS
LTWI-BP250 BELT PACK CONTROLS AND CONNECTIONS
1.
Headset cable connector
2.
OLED display
3.
Headset TALK button with indicator light
4.
Power (PWR) button
5.
Headset communication group (GRP) button
6.
Headset speaker volume control (UP) /
Menu selection button
7.
Menu SET button
8.
Headset speaker volume control (DOWN) /
Menu selection button
9.
Belt clipper
10.
Battery cover
11.
Charger terminals (Bottom)
BASE STATION DISPLAY MENU
BELT PACK DISPLAY MENU
Base Station
:
“Beep”, “Maximum”, “Minimum”, “Group
one/two/t
hree”, “Group all”
Belt Pack
:
“Power on”, “Power off”, “Hands free on”, “Hands
free
off”, “Beep”, “Maximum”,“Minimum”, “Audio channel is
busy”, “Unlatched”, “Change battery”, “Out of coverage”
“Group one”, Group two”, “Group three”
<MAIN Menu>
<VOLUME Menu>
<UNLATCH Menu>
<RBS Menu>
<BELTPACK>
<NORMAL Menu>
<LABEL/GROUP/PAIR
Menu>
<RESET Menu>
<MAIN Menu>
<HANDS FREE on/off>
<SPAKER volume>
<MICROPHONE gain>
2
3
5
8
12
13
1
2
3
4
5
6
7
8
9
10
9
10
11
8
7
4
1
2
3
6
Front and rear panel of the Belt Pack, LTWI-BP250
1
Press SET to move from
NORMAL to MAIN menu
Press SET to move from NORMAL to MAIN menu
Use UP/DOWN/LEFT/RIGHT
button to move
Use UP/DOWN button to move
5
Rear panel of the Base Station, LTWI-BS250
1
6
▣
Pressing PWR button slightly on any menus will lead you to the NORMAL menu.
to move
VOICE MESSAGES
▣
Pressing SET for 2 seconds on any menus will lead you to the NORMAL menu.
4
7
14
10
9
11
<HANDSOFF SENSIBILITY>
<TWO GROUPS>
