background image

9

If both buttons have not pressed for 
several seconds, they will retune to 
seek tuning mode and 

“AUTO”

 

appeared on the display.

• LOCAL/DISTANCE

Press 

LOC

 button (2) shortly to select

between local and distant stations.  
Local setting for reception of strong 
station, and a distant setting for reception
of weaker stations. This function is in 
effect during AUTO SEEK operation.

• MONO/STEREO

Press 

MON

 button (3) to select 

monaural or stereo (Mono reception 
for radio stations). You can sometimes
improve reception of distant stations 
by selecting mono operation.

• AUTOMATICALLY MEMORY 

STORING & PROGRAM SCANNING

- Automatic Memory Storing

Press 

AMS

 button (18) for several 

seconds, the radio searches from 
the current frequency and checks 
the signal strength until one cycle 
search is finished.  And then 6 
strongest stations are stored into the
corresponding preset number button.

- Program Scanning

Press 

AMS

 button (18) shortly to 

scan preset station.  When the field 
strength level is more than the 
threshold level of stop level.
The radio is holding at that preset 
number for several seconds with 
releasing mute, then searches again.

• STATION STORING

Press any one of the preset buttons 
(14) (M1 to M6) to select a station 
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the 
number button.

CD OPERATION

• SELECT TRACKS

Press 

TUNE/SKIP/TRACK

      button

(16) or 

TUNE/SKIP/TRACK

      button

(17) to move to the previous track or  
the following track.  Track number 
shows on display.
Hold 

TUNE/SKIP/TRACK

      button 

(16) or 

TUNE/SKIP/TRACK

       button

(17) to fast reverse or fast forward.
CD play starts from when you release 
the button.

• PAUSE PLAYING

Press 

PAU

 button (19) to pause CD 

player.  Press it again to resume play.

• REPEAT THE SAME TRACK

Press 

RPT

 button (21) to continuously

repeat the same track. Press again to 
stop repeat.

• PREVIEW ALL TRACKS

Press 

SCN

 button (20) to play first 

several seconds of each track on the 
current disc.  Press again to stop intro
and listen to track.

• PLAY ALL TRACKS

Press 

SHF

 button (22) to play all tracks

on CD in random order.  Press again 
to cancel the function.

• EJECT

When the front panel is sliding down, 
press 

EJECT

 button (24) to stop CD 

playing and eject the disc from the disc
slot (5).

NOTE ON CD-R/CD-RW DISCS

• On this unit, in addition to an audio 

CD, you can play your original CD-R 
or CD-RW that contain audio titles.

• However, depending on the conditions

of the recording equipment or the
CD-R/CD-RW disc itself, some
CD-Rs or CD-RWs cannot be played 
on this unit.

• DO NOT stick paper or tape, etc. onto

the label side or the recording side of
any CD-R/CD-RW, as it may cause a 
malfunction.

+

-

+

-

Содержание VBD 1400













Отзывы: