Lanzar Lanzar Vibe VBD1800, Руководство пользователя

Страница: 9 / 16

9
• LOUDNESS
Press BND/LOUD button (13) for
several seconds to increase bass
output and display will show
“LOUD
ON” . Press it again for several
seconds to release this function.
• SET THE CLOCK
Press the DSP button (15), and the
clock is shown on the display.
Then hold down the button until the
clock flashes. Then press the
TUNE/TRACK/SKIP button (17)
to change hours or
TUNE/TRACK/SKIP button (16)
to change minutes.
• SELECT MODE
Press MOD button (6) to choose
desired listening mode.
• SUBWOOFER
Press MOD button (6) for several
seconds to toggle subwoofer output.
Press it again for several seconds to
release this mode.
• MUTE
Press MUT button (2) to silence the
receiver. Press it again to release the
mode.
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (8).
• EQUALIZATION
Press EQ button (24) to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
• REMOTE SENSOR
Point the remote control handset to
the remote sensor
RX (23). Press the
function keys on the handset to control
the system.
• RESET
RESET button (26) must be activated
with either a ball point pen or thin metal
object.
RESET button (26) is to be
activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
Note: If press RESET button (26), the
unit can’t work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the back of the
front panel.
RADIO OPERATION
• BAND SELECTION
At tuner mode, press BND/LOUD
button (13) shortly to select the desired
band. The reception band will change
in the following order:
• STATION SELECTION
Press TUNE/TRACK/SKIP button
(16) or TUNE/TRACK/SKIP button
(17) shortly to activate automatic seek
function. Press for several seconds
until
“MANUAL” appeared on the
display, the manual tuning mode is
selected. If both buttons have not
pressed for several seconds, they will
return to seek tuning mode and
“AUTO” appeared on the display.
• LOCAL/DISTANCE
Press LOC button (3) to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations.
• MONO/STEREO
Press MON button (1) to select mono
or stereo mode.
OPERATION
FLAT CLASSIC POP M ROCK M DSP OFF
FM1 FM2 FM3 AM