· Check that the headset is within 10 meter(30 feet ) of your phone and that there
are no obstructions between the headset and the phone, such as walls or other
electronic devices.
If no paring is made over a period of time, the headset will retreat paring mode. You
have to turn off the headset and operate again.
5.
Basic use
5.1
Make a call
To make a call, use your phone in the normal way when the headset is connected to
your phone. The sound will be transmitted to the headset automatically.
5.2
Answer a call
When there is incoming call, press the answer/end key, or use the phone keys to
answer the call.
5.3
End a call
After finishing the call, press the answer/end key, or use the phone keys to end the
call.
5.4
Refuse a call
When there is incoming call, press and hold answer/end button for 3 seconds until
you can hear beep sound from the headset.
5.5
Voice dialing (dialing a number by saying a name)
It is possible to make a call directly from the headset using voice recognition. To use
this voice dialing function, your mobile phone must provide this option and
corresponding voice samples must have been recorded.
Step-1
Enable voice recognition function of your mobile and set the mobile to
handsfree state.
Step-2
When no call is in progress, long press the Volume – button for 3S, then you
can hear beep sound from the headset.
Step-3
Speak out the name of the person you wish to call loudly.
5.6 Redail
Double press the answer/end key and you can hear beep sound from the headset.
Release the button and the headset will dial the last dialed telephone number.
5.7
Microphone Mute
While talking using the headset, press and hold the Volume - button for 3 seconds to
mute the microphone. Press it again to activate the headset microphone.
5.8 Adjust the earphone volume
Press the key to increase or - to decrease the volume during a call.
5.9 Switch the call between mobile and headset
In call state, press and hold the answer/end key for about 3 seconds until there is
beep sound from headset. The call will be switched from headset to mobile or vice
versa.
6. LED Indication
Headset status
LED Indication
In idle state after paired
Blue light flashes 1 time every 7 seconds
In coming call
Blue light flashes 1 time every 5 seconds
