Lantronix xSenso 2100 Скачать руководство пользователя страница 31

Страница: 31 / 92

5: Configuration Using Web Manager

xSenso 2100 User Guide



At the bottom of most pages, the current configuration is displayed. In some cases, you

can reset or clear a setting.



The information or help area shows information or instructions associated with the page.



Logout

link is available at the upper right corner of every

Setup

and

Admin

page. In

Chrome or Safari, it is necessary to close out of the browser to completely logout. If

necessary, reopen the browser to log back in.



The footer appears at the very bottom of the page. It contains copyright information and a

link to the Lantronix home page.

Navigating Web Manager

The Web Manager provides an intuitive point-and-click interface. A menu bar on the left side of

each page provides links you can click to navigate from one page to another while the Reading,

Chart and Logging pages are accessed by tabs across the top of the page. Some pages are read-

only, while others let you change configuration settings.

Note:

There may be times when you must reboot the xSenso for the new configuration

settings to take effect. The chapters that follow indicate when a change requires a reboot.

Anytime you reboot the unit, this operation will take some time to complete. Please wait a

minimum of 10-20 seconds after rebooting the unit before attempting to make any

subsequent connections.

Web Manager Page

Description

See
Page

Status

Shows product information and network, analog status, and tunneling

settings.

Alarm

Allows you to view and configure the alarm.

Analog Input

Allows you to view and configure analog input, shows current input statuses

and allows you to scale and modify display of both analog inputs.

Chart

Shows analog data on a live chart and chart configuration options.

CLI

Shows Command Line Interface (CLI) statistics and lets you change the

current CLI configuration settings.

DAQ Format

Allows you to change data response format in Tunnel and Alarm connect

applications.

Diagnostics

Lets you perform various diagnostic procedures.

DNS

Shows the current configuration of the DNS subsystem and the DNS cache.

Email

Shows email statistics and lets you clear the email log, configure email

settings, and send an email.

Filesystem

Shows file system statistics and lets you browse the file system to view a file,

create a file or directory, upload files using HTTP, copy a file, move a file, or

perform TFTP actions.

FTP

Shows statistics and lets you change the current configuration for the File

Transfer Protocol (FTP) server.

HTTP

Shows HyperText Transfer Protocol (HTTP) statistics and lets you change the

current configuration and authentication settings.

Содержание xSenso 2100





























































































Результаты поиска

Содержание xSenso 2100

Отзывы:

Lantronix xSenso 2100, Руководство пользователя, Страница: 31 / 92

Результаты поиска

Содержание xSenso 2100

Отзывы: