XPort Pro User Guide
23
4:
Configuration Using Web Manager
This chapter describes how to configure the XPort Pro using Web Manager, the Lantronix
browser-based configuration tool. The unit’s configuration is stored in nonvolatile memory and is
retained without power. All changes take effect immediately, unless otherwise noted. It contains
the following sections:
Table 4-3 Summary of Web Manager Pages
Accessing Web Manager
Note:
You can also access the Web Manager by selecting the Web Configuration tab on
the DeviceInstaller window.
To access Web Manager, perform the following steps:
1. Open a standard web browser. Lantronix supports the latest version of Internet Explorer,
Mozilla Suite, Mozilla Firefox, Safari, Chrome or Opera.
2. Enter the IP address of the XPort Pro in the address bar. The IP address may have been
assigned manually using DeviceInstaller (see the XPort Pro
Quick Start Guide
) or
automatically by DHCP.
3. Enter your username and password.The factory-default username is “admin” and the factory-
default password is “PASS.” The Device Status web page shown in
displays
configuration, network settings, line settings, tunneling settings, and product information.
Note:
The Logout button is available on any web page. Logging out of the web page
would force re-authentication to take place the next time the web page is accessed.