XPort AR Integration Guide
8
2: Description and Specifications
The XPort AR embedded device server is a complete network-enabling solution enclosed
within an RJ45 package. This miniature device server empowers original equipment
manufacturers (OEMs) to quickly and easily go to market with networking and web page
serving capabilities built into their products.
The XPort AR
The XPort AR contains Lantronix’s own DSTni controller, with 256 Kbytes of SRAM,
16 Kbytes of boot ROM, and integrated AMD 10/100 PHY.
The XPort AR also contains the following:
New powerful operating system with additional new features.
Two full serial ports with all hardware handshaking signals (or three serial ports without
handshaking signals).
13 pins are configurable as general purpose I/O.
Supports fully compliant Power over Ethernet (PoE) designs by using PoE compliant
magnetics and passing through both the used and unused pairs.
Memory: 4 MB Flash and 1.25 MB RAM.
3.3-volt serial interface.
All I/O pins are 5V tolerant.
Ethernet magnetics.
Power supply filters.
Reset circuit.
+1.8V regulator.
Ethernet LEDs.
The XPort AR re3.3-volt power and is designed to operate over an industrial
temperature range (see technical data).
Figure 2-1. Side View of the XPort AR
Содержание XPort AR
Страница 1: ...Part Number 900 406 Revision H October 2011 XPort AR Integration Guide...
Страница 13: ...2 Description and Specifications XPort AR Integration Guide 13 Figure 2 5 Bottom View Figure 2 6 Side View...
Страница 26: ...3 Evaluation Kit XPort AR Integration Guide 26 Figure 3 3 Evaluation Board Schematic...
Страница 27: ...3 Evaluation Kit XPort AR Integration Guide 27 Evaluation Board continued...