xPico
®
240 Evaluation Kit Quick Start Guide
WHAT’S
IN THE
BOX
xPico 240
Evaluation Board
Firmware &
License Agreement
u.fl to RP-SMA Adapter
Cables and Antennas
5V Power Supply with
Regional Adapters
2. HARDWARE INSTALLATION
2a.
Attach the antenna(s) to the evaluation board.
2b.
Supply power to the evaluation board by plugging in the included power adapter to the 5V
DC Power Input (shown above).
2c.
Move the ON/OFF power switch to ON.
2d.
Proceed to the next page for instructions on how to configure the xPico 240 using the web
manager UI.
1. HARDWARE OVERVIEW
DB9 RS232
Serial Port
3.3V
Header
Peripheral I/O
Header
USB Port
Host/Device
Install
for USB Host
5V DC
Power Input
Power
On/Off
10/100
Ethernet
RJ 45
Wake
LED1
Status
xPico 240
Module
Power LED
Defaults
Reset
LED 3 Ethernet
Activity
LED 2
Ethernet Speed
