Lantronix WiPort Скачать руководство пользователя страница 14

Страница: 14 / 93

WiPort Embedded Wireless Device Server User Guide

3: Using DeviceInstaller

This chapter covers the steps for getting the WiPort embedded wireless device

server online and viewing its current configuration.

Note:

DeviceInstaller is a free utility program provided by Lantronix that

discovers, configures, upgrades, and manages Lantronix Device Servers. It

can be downloaded from the Lantronix website at

www.lantronix.com/support/downloads

For instructions on using DeviceInstaller to configure the IP address and

related settings or for more advanced features, see the

DeviceInstaller

Online Help

Installing DeviceInstaller

To install DeviceInstaller:

1. Download the latest version of DeviceInstaller from

http://www.lantronix.com/downloads

2. Run the executable to start the installation process.
3. Respond to the installation wizard prompts. (If prompted to select an installation

type, select

Typical

Assigning an IP Address

The unit’s IP address must be configured before it can work correctly on a network.

You have several options for assigning an IP to your unit. We recommend that you

manually assign the IP address over the network using DeviceInstaller.

Note

To use a serial connection instead of an Ethernet connection to

configure the device, see

5 Configuration via Telnet or Serial Port (Setup

Mode)

on page

The unit’s IP address is normally set to 0.0.0.0 at the factory. The hardware address

is on the product label. The unit is DHCP enabled as the default.

To assign an IP address manually:

4. Click

Start



All Programs



Lantronix



DeviceInstaller

4.4



DeviceInstaller

. If your PC has more than one network adapter, a message

displays. Select an adapter and click

Note:

If the unit already has an IP address (e.g., DHCP has assigned an IP

address), click the

Search

icon and select the unit from the list of Lantronix

device servers on the local network.

5. Click the

Assign IP

icon .

6. If prompted, enter the hardware address (on the product label) and click

Next

Содержание WiPort






























































































Результаты поиска

Содержание WiPort

Отзывы:

Похожие инструкции для WiPort

Бренды по названию

Популярные бренды

Lantronix WiPort, Руководство пользователя

Результаты поиска

Содержание WiPort

Отзывы:

Похожие инструкции для WiPort

Бренды по названию

Популярные бренды