5: Changing the UBox's Settings
UBox User Guide
39
again.
Connection
Password
and
Reenter Password
If you selected the checkbox above, enter and then reenter
a password a user must use to view the USB device.
Share Mode
Select one of the following types of connection:
Shared:
Allows multiple computers to connect to and
disconnect from the USB device. Default.
Dedicated:
Dedicates the USB device to a specific
computer.
Share modes
apply to a specific UBox:
If you move a USB device to another UBox, reset that
USB device's share mode
on the new UBox.
If your USB Device does not have a serial number,
and you move the USB device to a different port, reset
the share mode. This is only necessary if the share
mode is
Dedicated
.
Client Name
If you selected the
Requires Password To Connect
checkbox and the
Share Mode
of
Dedicated
, enter the
name of the computer. (See the
Local Settings
tab for the
name.)
5. Click
the
OK
button. The updated information displays. An asterisk displays in
the
Cfg
column to indicate that the device has been configured.
6. To edit the configuration:
a) Select the device and click the
Edit
button.
b) Repeat steps 4-5.
Applying, Canceling, or Removing Server Settings
1. Do one of the following:
To save your changes, click the
Apply
button. The UBox hardware
disconnects any users connected to it and restarts itself. Your UBox
disappears temporarily from the UBox application while it restarts.
Note:
The Apply button is not available unless you make a change.
To cancel the changes you made, click the
Cancel
button. The UBox does
not restart.
To delete the configuration, click the
Remove
button. The original
information displays.
