Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
249
of
272
27.8 MRP Setup (CLI Commands)
Example 1
: Create two new MRP domains on an SISPM1040-582-LRT:
SISPM1040-582-LRT(config)#
mrp domain new 1
SISPM1040-582-LRT(config)#
mrp domain new 2
SISPM1040-582-LRT(config)#
Example 2
: Show default config for newly-created MRP domains 1 and 2:
SISPM1040-582-LRT(config)#
do show mrp 1
Domain:
Admin Role: Undefined
Name: Domain1
UUID: Default
Primary Ring Port ID: Undefined
Secondary Ring Port ID: Undefined
VLAN ID: 0
SISPM1040-582-LRT(config)#
do show mrp 2
Domain:
Admin Role: Undefined
Name: Domain2
UUID: Default
Primary Ring Port ID: Undefined
Secondary Ring Port ID: Undefined
VLAN ID: 0
SISPM1040-582-LRT(config)#
Example 3
: Configure MRP 1 (Manager) and MRP 2 (Client) parameters:
SISPM1040-582-LRT(config)#
mrp 1 role manager
SISPM1040-582-LRT(config)#
mrp 1 manager media-redundancy enable
SISPM1040-582-LRT(config)#
mrp 1 manager priority 3
SISPM1040-582-LRT(config)# mrp 1
manager test-interval 25
SISPM1040-582-LRT(config)# mrp 1
manager test-monitoring 4 2
SISPM1040-582-LRT(config)# mrp 1 vlan 100
SISPM1040-582-LRT(config)#
mrp 2 client blocked-state enable
SISPM1040-582-LRT(config)#
mrp 2 client link-interval 15 30 2
SISPM1040-582-LRT(config)#
mrp 2 ringport secondary GigabitEthernet 1/5
SISPM1040-582-LRT(config)#
mrp 2 vlan 200
SISPM1040-582-LRT(config)#
Example 4
: Show newly-configured MRP 1 parameters:
SISPM1040-582-LRT(config)#
do show mrp 1
Operational:
Role: Manager
Status: Enabled
Ring State: Open
Primary Ring Port State: Forwarding
Secondary Ring Port State: Forwarding
Domain:
Admin Role: Manager
Name: Domain1
UUID: Default
Primary Ring Port ID: 2
Secondary Ring Port ID: 4
VLAN ID: 10
Manager:
Priority: 8