LOGGING IN TO THE SLC WEB PAGE CONTINUED
2. In the URL field, type
https://
followed by the IP address of your SLC.
3. At the first login, enter
sysadmin
(all lower case) as the user and
PASS
(all upper
case), the default factory password.
The first time you log in, the SLC Quick Setup page displays. Subsequent logins
display the SLC Home Page. (To display Quick Setup again, click the
Quick Setup
tab.
4. Do one of the following:
• To bypass the Quick Setup page and go directly to configuring the SLC, click
the
Accept default Quick Setup settings
checkbox and click
Apply
.
• Update basic network parameters, if desired, and click
Apply
.
LOGGING IN TO THE COMMAND LINE INTERFACE
To access the command line interface
1. Do one of the following:
• With a network connection, use a Telnet or SSH program to Telnet or SSH to
xx.xx.xx.xx
(the IP address in dot quad notation), and press
Enter
.You should be
at the login prompt.
Note:
By default,Telnet is disabled.To enable Telnet, use the
Services web page, a serial terminal connection, or an SSH connection
• With a serial terminal connection, when the command line displays, press
Enter
.
2. Enter
sysadmin
as the user name and press
Enter
.
3. Enter
PASS
as the password and press
Enter
. The first time you log in, the Quick
Setup script opens automatically. Subsequent logins display the command prompt
only. (To obtain the Quick Setup script again, use the
admin quicksetup
command.)
Note:
Change the default password as soon as possible to prevent access by
unauthorized personnel. Subsequent logins require the username
sysadmin
and the appropriate password to log in as system administrator.
8
W W W . L A N T R O N I X . C O M
LOGGING IN TO THE COMMAND LINE INTERFACE CONTINUED
4. If the Quick Setup script displays, update basic network parameters, as desired.
Otherwise, just press
Enter
until the command prompt displays. By pressing
Enter
,
you are accepting the current settings.
Notes:
• For general command line interface help, type
help command line
.
• For help with a specific command, type
help
followed by the command, for
example,
help set network
or
help admin firmware
.
CONTACT INFORMATION
For questions and technical support, please check our online knowledge base
at
www.lantronix.com/support
Lantronix
15353 Barranca Parkway, Irvine, CA 92618, USA
Phone: (949) 453-3990 or Fax: (949) 453-3995
www.lantronix.com
9
Q u i c k S t a r t G u i d e
S L C C o n s o l e M a n a g e r s
